manualshive.com logo in svg

Miele KFN 37692 iDE, Operating And Installation Instructions

Share
Download
Miele KFN 37692 iDE Operating And Installation Instructions Download Page 83

Information for dealers

83

Switching off Demo mode

The 

 symbol is lit up in the display.

Touch the settings sensor.

All symbols available for selection will

appear in the display and the 

 symbol

flashes.

Touch the sensors for setting the

temperatures (

 or 

) until the

 symbol flashes.

Touch the OK sensor to confirm your

selection.

1

 flashes in the display (means: Demo

mode is activated) and the 

 symbol

lights up.

Touch the 

 or 

 sensor until 

0

 ap‐

pears (means: Demo mode is switch‐

ed off).

Touch the OK sensor to confirm your

selection.

The selected setting is applied, the

 symbol flashes.

Touch the settings sensor to leave

settings mode.

Otherwise the appliance exits set‐

tings mode automatically after ap‐

proximately one minute.

The Demo mode is switched off, the

 symbol goes out.

Summary of Contents for KFN 37692 iDE





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands