manualshive.com logo in svg

Miele KFN 37692 iDE, Operating And Installation Instructions

Share
Download
Miele KFN 37692 iDE Operating And Installation Instructions Download Page 37

Selecting further settings

37

Switching on Sabbath mode

Touch the settings sensor.

All symbols available for selection will

appear in the display and the 

 

symbol

flashes.

Touch the sensors for setting the

temperatures (

 or 

) repeatedly un‐

til the 

 symbol flashes.

Touch the OK sensor to confirm your

selection.

The last selected setting flashes and

the 

 symbol lights up in the display.

By touching the 

 or 

 sensor you

can now switch on Sabbath mode.

To do this, select setting 

1

Touch the OK sensor to confirm your

selection.

The selected setting is applied, the 

symbol lights up.

As soon as the 

 symbol goes out in

the display after 3 seconds, Sabbath

mode is switched on.

Switch off Sabbath mode after the

Sabbath has passed.

Switching off Sabbath mode

Touch the settings sensor to leave

Sabbath mode.

The temperature will appear in the dis‐

play and the interior lighting will come

on.

Summary of Contents for KFN 37692 iDE





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands