Problem solving guide
69
Display warnings
Problem
Cause and remedy
The alarm symbol
and the sensor for one
of the sections light up
in the display, and an
audible alarm also
sounds.
The door alarm has been activated.
Close the appliance door. The alarm symbol
will go out and the alarm will stop.
The alarm symbol
and the sensor for one
of the sections flashes
and an acoustic alarm
also sounds.
The temperature in the zone concerned has risen
higher or fallen lower than the temperature set.
This could be due to:
– the appliance door being opened too often, or be‐
ing left open.
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– a lengthy interruption to the power supply.
Rectify the cause of the alarm.
The alarm symbol
goes out and the sensor for the
section concerned lights up constantly. The audible
alarm stops.
Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as pos‐
sible. Defrosted food may only be re-frozen after it
has been cooked.
"
F0
to
F9
" appears in
the display.
There is a fault.
Call the Miele Service Department.
"
FE*
" appears in the dis‐
play.
There is a fault.
Call the Miele Service Department.
Summary of Contents for KFN 37692 iDE
Page 12: ...Warning and Safety instructions 12 scratching the surface coating ...
Page 112: ......
Page 113: ......
Page 114: ......