manualshive.com logo in svg

Miele KFN 37692 iDE, Operating And Installation Instructions

Share
Download
Miele KFN 37692 iDE Operating And Installation Instructions Download Page 58

Cleaning and care

58

Rinsing the ice cube maker

The ice cube maker and water sup‐

ply pipework must be rinsed:

– before using for the first time, 

– if the ice cube maker has not been

used for a long time, 

– regularly when in continuous use

(at least once a month), to remove

ice residues from the system (to

avoid a blockage of the water sup‐

ply) and

– before switching the ice cube mak‐

er off for a long time.

After selecting the "Rinse the ice cube

maker" setting the ice cube maker 

and the water supply pipework will be

rinsed automatically.
The ice cube tray then rotates into the

cleaning position to allow you to dry it

by hand.
Water is collected in the ice cube draw‐

er 

.

Make sure the ice cube drawer is

empty before selecting the "Rinse the

ice cube maker" setting. Otherwise

the water will empty onto the contents

of the drawer.

The Rinsing setting can only be se‐

lected when the ice cube maker is

switched on.

Touch the settings sensor.

All symbols available for selection will

appear in the display and the 

 symbol

flashes.

Touch the sensors for setting the

temperature (

 or 

), repeatedly until

the ice cube maker symbol 

 flash‐

es.

Touch the OK sensor to confirm your

selection.

By touching the X or Y sensor, you

can now select the setting you want:

0

: the ice cube maker is switched off

1

: the ice cube maker is switched on

2

: set the water volume

3

: select the ice cube tray cleaning

position

4

: 

rinse the ice cube maker

Touch the OK sensor to confirm your

selection.

The selected setting is applied. The

symbol in the display for the ice cube

maker 

 and the indicator light on the

ice cube maker will flash while the ice

cube maker is being rinsed.
You will hear the ice cube tray turn so

that it is at an angle.

Wait until the ice cube tray has com‐

pleted this rotation before continuing.

The ice cube maker will then switch off.

Summary of Contents for KFN 37692 iDE





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands