Miele KFN 37692 iDE Operating And Installation Instructions Download Page 60

Page: 60 / 116

Cleaning and care



Touch the sensors for setting the

temperature (



and



) repeatedly

until the ice cube maker symbol



flashes in the display.



Touch the OK sensor to confirm your

selection.



By touching the





sensor, you

can now select the setting you want:

: the ice cube maker is switched off

: the ice cube maker is switched on

select the ice cube tray cleaning

position

: rinse the ice cube maker



Touch the OK sensor to confirm your

selection.

The selected setting will be applied and

you will hear the ice cube tray rotate in‐

to an angled position.



Wait until the ice cube tray has com‐

pleted this rotation before continuing.

The ice cube maker will then switch off.

The ice cube maker symbol



will go

out.



Remove and clean the ice cube

drawer.

The ice cube tray cannot be removed

and must be cleaned in situ.



Clean the ice cube tray



When the ice cube maker is switched

back on again, the ice cube tray will

rotate back into the original position.

Summary of Contents for KFN 37692 iDE





















































































































Search results

Summary of Contents for KFN 37692 iDE

Reviews:

Related manuals for KFN 37692 iDE

Brands by name

Popular brands

Miele KFN 37692 iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFN 37692 iDE

Reviews:

Related manuals for KFN 37692 iDE

Brands by name

Popular brands