Miele KFN 37692 iDE Operating And Installation Instructions Download Page 71

Page: 71 / 116

Problem solving guide

Problems with the ice cube maker

Problem

Cause and remedy

The ice cube maker will

not switch on.

The appliance is not connected to the power supply

or is not switched on.



Reconnect to the mains and switch the appliance

back on.

The ice cube maker is

not producing any ice

cubes.

The appliance or the ice cube maker is not switched

on.



Switch on the appliance and the ice cube maker.

The water supply is turned off.



Turn on the water supply.

The ice cube drawer is not closed properly.



Push the drawer in properly.

The ice cube tray is not in the correct position.



Correct the position of the ice cube tray.

The temperature in the freezer section is too high.



Select a lower temperature.

Summary of Contents for KFN 37692 iDE





















































































































Search results

Summary of Contents for KFN 37692 iDE

Reviews:

Related manuals for KFN 37692 iDE

Brands by name

Popular brands

Miele KFN 37692 iDE, Operating And Installation Instructions

Search results

Summary of Contents for KFN 37692 iDE

Reviews:

Related manuals for KFN 37692 iDE

Brands by name

Popular brands