![background image](http://html.mh-extra.com/html/miele/kfn-14943-sde-ed/kfn-14943-sde-ed_operating-and-installation-instructions_236544067.webp)
The appliance doors can be aligned
with the housing after they have been
fitted.
In the following illustration the door
is not shown in the closed position to
make it easier to see what you have
to do.
Align the
lower door
using the long
outer slots in the lower hinge plate:
^
Remove centre screw
a
from the
hinge plate.
^
Slightly loosen both outer screws
b
.
^
Align the door by sliding the hinge
plate to the left or right.
^
Then tighten screws
b
again. Screw
a
does not need to be used again.
Align the
upper door
using the long
outer slots in the middle hinge plate:
^
Slightly loosen the three screws
c
.
^
Align the door by sliding the hinge
plate to the left or right.
Then tighten screws
c
.
Aligning the appliance doors
67
Summary of Contents for KFN 14943 SDE ED
