Miele KFN 14943 SDE ED Operating And Installation Instructions Download Page 39 | Manualshive

Page: 39 / 72

background image

Refrigerator section

The refrigerator defrosts automatically.

Condensate and frost can build up on
the back wall of the refrigerator section
whilst it is in use. You do not need to
remove this, as it will defrost and
evaporate automatically with the
warmth generated by the appliance.

The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.

Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that
condensate can flow away without
hindrance.

Freezer section

This appliance is equipped with a "Frost
free" system. The freezer section
defrosts automatically.

The moisture generated in the
appliance collects on the condenser
and is automatically defrosted and
dissipated from time to time.

This automatic defrosting system
enables the freezer section to remain
permanently ice-free, however, the food
stored in the freezer section will not
defrost.

Automatic defrost

39

«
...
37
38
39
40
41
...
»

Summary of Contents for KFN 14943 SDE ED









































































Reviews:

No comments

Related manuals for KFN 14943 SDE ED

Brand: Panasonic Pages: 8

Modular 3000 Series

Brand: U-Line Pages: 12

Brand: U-Line Pages: 19

Brand: U-Line Pages: 30

Brand: U-Line Pages: 28

Brand: U-Line Pages: 31

Brand: Marvel Pages: 1

Brand: Galaxy Pages: 64

Brand: JUNO Pages: 44

Brand: Rangemaster Pages: 20

Brand: Zanussi Electrolux Pages: 10

Brand: Svan Pages: 76

Brand: Igloo Pages: 11

Brand: Avanti Pages: 40

Brand: Galanz Pages: 26

Brand: Haier Pages: 36

Brand: Haier Pages: 81

Brand: Haier Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands