![background image](http://html.mh-extra.com/html/miele/kfn-14943-sde-ed/kfn-14943-sde-ed_operating-and-installation-instructions_236544057.webp)
The appliance is supplied right-hand
hinged. If left-hand door hinging is
required, follow the instructions below.
To change the door hinging you will
need the following tools
:
– a cross-slotted screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed for
changing the door hinging.
Removing the door handles:
^
Pull door handle
a
towards you. Side
section
b
slides back.
^
Pull side section
b
firmly back out of
the guides on the mounting plate.
^
Undo the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^
Remove the cover caps from the
opposite side, and fit them into the
empty holes.
Changing the door hinging
57
Summary of Contents for KFN 14943 SDE ED
