![background image](http://html.mh-extra.com/html/miele/kfn-14943-sde-ed/kfn-14943-sde-ed_operating-and-installation-instructions_236544059.webp)
^
Remove cover
d
.
The soft-close mechanism is now
detached from the appliance.
^
Remove panel
a
.
^
Slide soft-close mechanism bracket
f
as far as it will go towards the
handle side of the door.
^
Undo the three screws
g
on the
soft-close mechanism and the
spacer.
^
Using a flat-bladed screwdriver push
the centre of the soft-close
mechanism towards the middle of the
door.
^
Then prise the soft-close mechanism
out of the hinge side of the door.
^
Place the soft-close mechanism to
one side.
^
Push the spacer out towards the
hinge side.
^
Then place the spacer to one side.
Removing the upper door:
^
Gently remove cover
h
by carefully
inserting a flat-bladed screwdriver
into the gap.
^
Remove cover
h
together with
retainer
i
.
^
Then separate retainer
i
from cover
h
, by pushing it slightly to the left
and then pulling the cover forwards
and off.
^
Rotate retainer
i
by 180°.
^
Then fit cover
h
from the front over
retainer
i
, and push it over to the
right. The writing must be visible.
^
Unscrew hinge part
j
, turn through
180° and fit to the opposite side. If
necessary drill pilot holes for the
screws.
^
Remove cover
k
by sliding it
forwards from the back and then
lifting it off.
^
Remove cover
l
by pulling it
upwards.
Changing the door hinging
59
Summary of Contents for KFN 14943 SDE ED
