Miele KFN 14943 SDE ED Operating And Installation Instructions Download Page 61

Page: 61 / 72

Push hinge pin

up and out from

underneath.

The soft-close mechanism is now
detached from the appliance.

Remove panel

Slide soft-close mechanism bracket

as far as it will go towards the

handle side of the door.

Undo the three screws

on the

soft-close mechanism and the
spacer.

Using a flat-bladed screwdriver push
the centre of the soft-close
mechanism towards the middle of the
door.

Then prise the soft-close mechanism
out of the hinge side of the door.

Place the soft-close mechanism to
one side.

Push the spacer out towards the
hinge side.

Then place the spacer to one side.

Removing the lower door:

Close the lower appliance door.

Pull the middle hinge pin

upwards

to remove it.

Carefully lift the lower door off and
place it to one side.

Pull cover

off.

Unscrew hinge plate

, turn it

through 180° and fit it on the opposite
side.

Turn plastic cover

180° and refit it

in the centre of hinge plate

Refit cover

on the opposite side.

Changing the door hinging

Summary of Contents for KFN 14943 SDE ED









































































Search results

Summary of Contents for KFN 14943 SDE ED

Reviews:

Miele KFN 14943 SDE ED, Operating And Installation Instructions, Page: 61 / 72

Search results

Summary of Contents for KFN 14943 SDE ED

Reviews: