Warning and Safety instructions
11
This oven must not be installed and operated in mobile
installations (e.g. on a ship).
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults.
Do not open the outer casing of the appliance.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
If the oven is delivered without a mains connection cable, or if the
mains connection cable is damaged, it must only be replaced by a
Miele approved service technician with a specialist connection cable
of type H 05 VV-F, available from Miele, (see “Electrical connection”)
in order to avoid a hazard.
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply, e.g. if the
oven lighting is faulty (see “Problem solving guide”). It is only
completely isolated from the electricity supply when:
– it is switched off at the mains circuit breaker, or
– it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
For the oven to function correctly, it requires a sufficient intake of
cool air. Ensure the intake of cool air to the oven is not impaired (e.g.
due to the installation of insulation material inside the housing unit).
Furthermore, the incoming cool air must not be excessively heated
by other heat sources (e.g. fuel furnaces).