The approximate finish time can be
estimated, as the duration of a cooking
programme using the food probe
corresponds more or less to the
duration of the same programme
without the food probe.
The "Duration" and "Finish" cannot be
entered as the total time depends on
how long it takes for the core
temperature to be reached.
Time left display
After a certain time the estimated
time
remaining
(i.e. the approx. time left to
run), appears in the display.
The actual core temperature is no
longer displayed and cannot be called
up.
The time remaining is calculated from
the cooking temperature set, the
required core temperature and the
course of the increasing core
temperature.
The time remaining first shown is an
estimate. As the cooking process
continues the time remaining is revised
continuously, and a more accurate
revised figure shown.
All information pertaining to the time
remaining is deleted if
– the cooking temperature or the core
temperature is altered.
– a different oven function is chosen,
If the oven door is held open for some
time, the time remaining will be
recalculated.
Using the residual heat, Energy save
function
The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.
Using the residual heat in the oven
saves energy.
"Energy save phase" will appear in the
display to show that the oven is in
energy save mode. The current core
temperature of the food will no longer
be shown.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting has
been chosen.
When the core temperature selected
has been reached,
– the oven switches off automatically.
– the message "Programme finished"
and the
O
symbol appear in the
display.
– the buzzer sounds (provided this is
activated - see "Settings - Volume -
Buzzer tones").
If the food is not yet cooked sufficiently,
insert the food probe into another place
and repeat the programme.
Food probe
13
Summary of Contents for H 5081
Page 2: ...2 ...