Press
c
touchpad to change from
30 to 31 or vice versa.
Press
h
touchpad. "SP" appears in
the display.
Press
h
touchpad again. The
change has been recorded and the
display field clears.
3. Increasing the temperature hold-
ing time in the "Wash" part of the
programme, ("SUPER-SHORT" pro-
gramme only).
The temperature holding time can be in-
creased from 1-3 mins in order to im-
prove the wash result in the "Super-
short" programme.
Switch off the dishwasher.
Press
q
and
c
hold them in and
also switch on the dishwasher with "I-
0".
"P..." appears in the display.
Press
b
. A "40" or "41" appears in
the display
"40" = Temp. holding time 1 min.
"41" = Temp. holding time 3 mins.
Press
c
touchpad to change from
"40" to "41" and vice versa.
Press
h
. "SP" appears in the display.
Press
h
again. The alteration has
been recorded and the display field
clears.
4. "Final rinse" without rinse aid and
using cold water, ("GLASSWARE"
programme only)
When the programme is completed the
glasses are wet and would need to be
dried by hand if necessary.
Switch off the dishwasher.
Press
q
and
c
at the same time,
hold them in and also switch on the
dishwasher with "I-0".
"P..." appears in the display.
Press
J
. A "50" or "51" appears in
the display.
"50" = rinse aid dosage and hot water.
"51" = without rinse aid dosage and
with cold water
Press
c
to change from "50" to "51"
and vice versa.
Press
h
. "SP" appears in the display.
Press
h
again. The alteration has
been recorded and the display field
clears.
Programming special functions
25
Summary of Contents for G 7764 SUPER-COMBI
Page 41: ...Technical data Noise emission in A Noise level 65 Technical data 37 ...
Page 42: ...38 ...
Page 43: ...39 ...
