manualshive.com logo in svg

Miele G 6892, Operating Instructions Manual, Page: 98 / 112

Share
Download
Miele G 6892 Operating Instructions Manual Download Page 98

Settings menu

98

Language 

The display can be set to appear in one
of several different languages.

You can change the language in the
display via the 

Language 

 sub-menu.

Select the language you want as well
as the country, if appropriate, and
confirm with 

OK

.

The flag after the word 

Language 

acts as a guide if a language which
you do not understand has already
been set.
If this is the case, keep selecting the
option which has a flag after it until
you reach the 

Language 

 sub-menu.

Time of day

You can select either a 24-hour or 12-
hour clock.

The current time of day must be set
before you can use the "FlexiTimer"
programme option.

Setting the clock format

Select the 

Clock format

 option.

Select the setting you want and
confirm with 

OK

.

Setting the time of day

Select the 

Set

 option.

Set the hour with the 



 arrow

buttons and confirm with 

OK

.

Then set the minutes and confirm
with 

OK

.

The time of day has now been saved.

Summary of Contents for G 6892

















































































































Reviews:

No comments