Guide to the appliance
7
Display
General
The display is used to select or set the
following:
– the programme
– the FlexiTimer (Delay start)
– the Settings menu
The display can show the following:
– the stage the programme is at
– the estimated time left for the
programme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
To switch the dishwasher back on
again, press the
button.
Settings menu
The Settings menu is used to alter the
dishwasher's electronics to suit
different requirements. You access the
Settings menu by pressing a specific
button combination (see "Settings
menu").
The arrows in the display indicate
further options. You can use the
arrow buttons next to the display,
as appropriate, to select these further
options.
The
OK
button is used to confirm a
message or setting and also to move to
the next menu or another level.
The option which is selected will have a
tick
next to it.
To exit a sub-menu, use the
arrow
buttons to select the
Back
option in
the display and confirm your selection
with
OK
.
If you do not press any of the buttons
for several seconds, the display will
return to the previous menu level. You
may need to enter your settings again.
Summary of Contents for G 6892
