Choosing a programme
Choose your programme according to
the type of load and how dirty it is.
In most cases this will be the NORMAL
programme or one of the UNIVERSAL
programmes.
NORMAL 55°
UNIVERSAL 55° or 65°
These programmes are ideally suited to
everyday loads, mixed loads with va-
rying degrees of soiling.
For particular needs there are special
programmes:
The different programmes and their
uses are described on the next two
pages in the Programme chart.
You can also choose the additional
function "Top Solo" for each programme.
See the "Additional functions" chapter
for further information.
Programme “Energy save”
Use this programme for lightly to nor-
mally soiled crockery.
For technical reasons a warm water
intake of at least 45°C (temperature
of the incoming water) is necessary
for this programme.
Water is not heated up in this pro-
gramme.
Only approx. 0.20 kWh is used.
The drying result will not quite match
that of a programme with a full drying
cycle.
The higher the temperature of the water
taken in (up to 60 ° max), the better the
results obtained with this programme.
The door of the dishwasher can be
left ajar at the end of this programme
to dispel vapour/moisture more
quickly.
Choosing a programme
33
Summary of Contents for G 685
