Miele G 6820 Operating Instructions Manual Download Page 73

Page: 73 / 112

Problem solving guide

Water inlet fault

Problem

Cause and remedy

The In-operation indic-
ator is flashing quickly.
The buzzer is sounding.
One of the following
faults is shown in the
display:



Open stopcock

The stopcock is closed.



Open the stopcock fully.



Water intake

Before rectifying the problem:



Switch the dishwasher off with the



button.

The water intake is restricted.



Open the stopcock fully and start the programme
again.



Clean the water inlet filter (see "Maintenance").



The water pressure at the intake is lower than
50 kPa (0.5 bar).
Seek professional advice.

The following message
appears in the display
during the

SolarSave

pro-

gramme:



Intake temp. low

The intake water has not reached the required tem-
perature of 45 °C (see "Plumbing, Connection to the
water supply").



Start the programme again.



If the fault message appears again, select a differ-
ent programme.

Summary of Contents for G 6820

















































































































Search results

Summary of Contents for G 6820

Reviews:

Related manuals for G 6820

Brands by name

Popular brands

Miele G 6820, Operating Instructions Manual

Search results

Summary of Contents for G 6820

Reviews:

Related manuals for G 6820

Brands by name

Popular brands