Miele G 6820 Operating Instructions Manual Download Page 13 | Manualshive

Page: 13 / 112

background image

Warning and Safety instructions

13



Do not connect the dishwasher to the mains supply until it has

been fully installed and any adjustment has been made to the door
springs.



The dishwasher may only be operated if the door opening mech-

anism is working correctly. Otherwise there could be a risk of danger
whilst the automatic door opening mechanism (depending on model)
is active.
To check that the door opening mechanism is working correctly:

– the door springs must be adjusted equally on both sides. They

are correctly adjusted when the door remains stationary when left
half open (approx. 45° opening angle). It is also important that the
door cannot fall open.

– the door locking pins automatically retract when the door opens

at the end of the drying phase.



Do not connect the appliance to the mains electricity supply by a

multi-socket adapter or an extension lead. These do not guarantee
the required safety of the appliance (fire hazard).



The appliance must not be used in a non-stationary location (e.g.

on a ship).



Do not install the dishwasher in a room where there is a risk of

frost. Frozen hoses may burst or split. The reliability of the electronic
control unit may be impaired at temperatures below freezing point.



To avoid any damage to the appliance, the dishwasher must only

be operated when it is connected to a fully vented plumbing system.



The plastic housing of the water connection contains an electrical

component. It must not be dipped in water.



There are electrical wires in the water inlet hose. Do not shorten

the water inlet hose, even if it is too long.

«
...
11
12
13
14
15
...
»

Summary of Contents for G 6820

















































































































Reviews:

No comments

Related manuals for G 6820

Brand: GE Pages: 108

Brand: GEAppliances Pages: 72

Brand: Omega Pages: 32

Brand: Glen Dimplex Pages: 48

Brand: IFB Pages: 14

Brand: Ardo Pages: 14

SWF1076 EZI SENSOR

Brand: Simpson Pages: 32

Brand: Alliance Laundry Systems Pages: 76

Brand: Fagor Pages: 33

Brand: Haier Pages: 22

Brand: Haier Pages: 40

Brand: Haier Pages: 19

Brand: Haier Pages: 12

Brand: Haier Pages: 20

Brand: Haier Pages: 20

Brand: Samsung Pages: 60

WA46CG3505A Series

Brand: Samsung Pages: 72

WA22M8700 Series

Brand: Samsung Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands