Miele G 6820 Operating Instructions Manual Download Page 79

Page: 79 / 112

Problem solving guide

Problem

Cause and remedy

White residue is visible
on crockery and cutlery,
clouding occurs on
glassware; film can be
wiped off.

The rinse aid dosage is set too low.



Increase the dosage (see "Settings menu, Rinse
aid").

There is no salt in the salt reservoir.



Fill the salt reservoir (see "Before using for the first
time, Dishwasher salt").

An unsuitable combination product has been used.



Change your detergent. Use a standard liquid, tab-
let or powder detergent.

The water softener is programmed to too low a water
hardness level.



Programme the water softener to a higher water
hardness level (see "Settings menu, Water hard-
ness").

There are rust stains on
cutlery.

The affected items are not corrosion resistant.



There is no remedy.
Purchase cutlery which is dishwasher-proof.

A programme was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.



Always run the

QuickPowerWash

programme with

the

Short

programme option selected and without

any crockery in the dishwasher after adding dish-
washer salt.

Summary of Contents for G 6820

















































































































Search results

Summary of Contents for G 6820

Reviews:

Related manuals for G 6820

Brands by name

Popular brands

Miele G 6820, Operating Instructions Manual

Search results

Summary of Contents for G 6820

Reviews:

Related manuals for G 6820

Brands by name

Popular brands