Miele G 6820 Operating Instructions Manual Download Page 77

Page: 77 / 112

Problem solving guide

Unsatisfactory washing result

Problem

Cause and remedy

The dishes are not
clean.

The dishes were not loaded correctly.



See notes in "Loading the dishwasher".

The programme was not powerful enough.



Select a more powerful programme (see "Pro-
gramme chart").

There is some stubborn soiling although most of the
crockery is only lightly soiled (e.g. with tea stains).



Use the

Automatic

programme option (see "Set-

tings menu, Automatic").

Not enough detergent was dispensed.



Use more detergent, or change your detergent.

Items are blocking the path of the spray arms.



Rearrange the items so that the spray arms can ro-
tate freely.

The filter combination in the base of the wash cabinet
is not clean or is not correctly fitted.
This may cause the spray arm jets to get blocked.



Clean and/or fit the filter combination correctly.



Clean the spray arm jets, if necessary (see "Clean-
ing and care, Cleaning the spray arms").

The non-return valve is open and blocked. Dirty water
has flowed back into the wash cabinet.



Clean the drain pump and the non-return valve
(see "Maintenance, Cleaning the drain pump and
non-return valve").

Smearing appears on
glassware and cutlery.
There is a bluish sheen
on the surface of glass-
ware; film can be wiped
off.

The rinse aid dosage is set too high.



Reduce the dosage (see "Settings menu, Rinse
aid").

Summary of Contents for G 6820

















































































































Search results

Summary of Contents for G 6820

Reviews:

Related manuals for G 6820

Brands by name

Popular brands

Miele G 6820, Operating Instructions Manual

Search results

Summary of Contents for G 6820

Reviews:

Related manuals for G 6820

Brands by name

Popular brands