Programme options
61
Buzzer tones
A sequence of audible tones will sound
at the end of the programme or if there
is a fault.
The buzzer at the end of a programme
and the warning buzzer in the event of a
fault will sound four times at intervals
with a short pause between each set.
The buzzer tones are set to off at the
factory.
If you want the buzzer to sound at the
end of a programme, you will have to
switch it on. Buzzer tones for faults are
always active.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector
button
in and,
whilst holding it in
,
switch the dishwasher on using the
button.
Keep the programme selector
button
pressed in for at least four
seconds until the lower right-hand
programme indicator comes on.
If this does not happen, start the
procedure from the beginning again.
Press the
button four times.
The
indicator will flash rapidly four
times at intervals.
The flashing sequence in the display
shows whether the buzzer at the end of
the programme is activated or
deactivated.
–
: Buzzer tones are switched on.
–
: Buzzer tones are switched off.
Press the programme selector
button
if you wish to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 6660
