Settings menu
88
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml.
The factory default setting is 3 ml.
If the function to adjust the Sensor
wash programme has been activated,
the amount of rinse aid dispensed in
the
Sensor wash
programme can be
higher than that set.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Select the rinse aid dosage you want
and confirm with
OK
.
Consumption (EcoFeedback)
You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the
total energy and water used in all
previous dishwasher programmes (see
"Caring for the environment,
EcoFeedback consumption indicator").
Consumption indicator
Select the (Consumption)
Display
option and confirm with
OK
.
Select the setting you want and
confirm with
OK
.
Total consumption
Select the
Total consumption
option
and confirm with
OK
.
You can call up the values for
Energy
and
Water
with the
arrow
buttons.
You can also reset the values for the
total consumption to 0.
Select the
Reset
option and confirm
with
OK
.
Select the
Yes
option and confirm
with
OK
.
Confirm the message with
OK
.
The values are now reset to 0.