manualshive.com logo in svg

Miele G 6570, Operating Instructions Manual

Share
Download
Miele G 6570 Operating Instructions Manual Download Page 21

Before using for the first time

21

Opening the door

At the end of programmes with a drying

phase (see "Programme chart"), the

door will open automatically a little in

order to help the drying process. 

This function can be deactivated, if

preferred (see "Settings menu,

AutoOpen").

Pull the handle.

Open the door completely to re-

engage the door closing mechanism.

If the door is opened during operation

all functions are automatically

interrupted.

Water in the dishwasher may be

hot. Danger of scalding.
Only open the door during operation

if absolutely necessary and exercise

extreme caution when doing so.

Keep the area around the door

free of obstructions.

Closing the door

Push the baskets right in.

Then raise the door up, and push

until it clicks into position.

Danger of injury.

Do not put your hand inside the door

as it is closing.

Summary of Contents for G 6570

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands