Miele G 6570 Operating Instructions Manual Download Page 60

Page: 60 / 96

Programme overview

Further programmes



Quick wash

Programme with a short duration for

removing fresh food residues that have

not dried on. This programme is also

suitable for glasses and plastic items

that do not tolerate high temperatures.

Hygiene

Special programme for items which

need to be hygienically clean, e.g. baby

bottles and chopping boards.

Extra quiet

Very quiet programme with a longer

duration. Suitable for mixed loads of

crockery, pots and pans with normal,

slightly dried on food residues.

SolarSave

This programme does not heat the

water. To use it the water intake

temperature must be at least 45 °C /

115 °F (see "Plumbing / Connection to

the water supply"). This programme is

suitable for mixed loads of crockery

and glassware with normal, slightly

dried on food residues.

Tall items 65 °C

Programme for very large heat-resistant

items, (e.g. very deep pans). In this

programme the upper basket is

removed to make space for large items

in the lower basket. This programme

has a medium action to remove normal,

slightly dried on residues.

Maintenance programme

The wash cabinet is largely self-

cleaning. However, if residues or soiling

build up in the cabinet, they can be

removed by running the "Maintenance

programme" without a load. This

programme is designed for cleaning the

wash cabinet using care products such

as Miele's dishwasher cleaner or

conditioner (see "Optional accessories /

Dishwasher care products). Please

follow usage instructions on the

packaging.

Summary of Contents for G 6570

































































































Search results

Summary of Contents for G 6570

Reviews:

Brands by name

Popular brands

Miele G 6570, Operating Instructions Manual

Search results

Summary of Contents for G 6570

Reviews:

Brands by name

Popular brands