manualshive.com logo in svg

Miele G 6570, Operating Instructions Manual

Share
Download
Miele G 6570 Operating Instructions Manual Download Page 54

Programme options

54

EcoStart

The 

EcoStart

 function allows you to take

advantage of time variable economy

rates of electricity. Before you can use

this option you must set up to three

electricity tariff time zones (see

"Settings menu, EcoStart"). 

You then set the latest time at which the

programme selected should end. 

The dishwasher will start automatically

in the cheapest tariff zone within the

time set.

Use the 



 arrow buttons to set the

hour and confirm with 

OK

.

The hours will be saved and the minute

number block will be highlighted.

Use the 



 arrow buttons to set the

minutes and confirm with 

OK

.

The estimated start time for the

programme selected will appear in the

display.

The 

Start indicator light will come on.

Close the door.

The selected programme will start

automatically during the most cost

effective time zone. It will finish at the

latest by the set finish time.

Changing or deleting set times

You can change the set times or the

programme before the start time in the

display is reached.

Open the door.

Press the 

 button.

Use the arrow buttons 



 to select

the setting you want to change and

confirm with 

OK

.

Use the arrow buttons 



 to select

the 

Change

 or 

Delete

 function and

confirm with 

OK

.

After confirming the 

Change

 function

you can change the set time.
After confirming the 

Delete

 function, the

programme duration will appear in the

display for the selected programme. 

The 

 indicator light will go out and the

indicator light for the selected

programme will come on.

Start the programme by closing the

door.

Summary of Contents for G 6570

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands