![background image](http://html.mh-extra.com/html/miele/g-5051/g-5051_operating-instructions-manual_234692065.webp)
Frequently Asked Questions
65
Water intake fault
Problem
Possible cause and solution
The dishwasher stops
working shortly after
the program starts.
The alarm tone is
sounding.
The
/
indicator
light flashes on and off.
and
173
appear
alternately on the time
display.
The water supply faucet is turned off.
Turn on the water supply faucet fully.
The dishwasher stops
during a program.
The alarm tone is
sounding.
The
/
indicator
light is flashing.
The fault number
or
appears in the
display.
Before remedying the fault:
Turn the dishwasher off with the
button.
There is a problem with the water intake.
Turn on the water supply faucet fully and start the
program again.
Clean the filter in the water intake (see “Cleaning
the filter in the water intake” under “Cleaning and
care”).
The water connection pressure is lower than
50 kPa.
Seek professional advice.
The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Water drainage” under
“Installation”).
The dishwasher stops
during a program.
Fault number
8
appears in the time
display.
A technical fault has occurred.
Turn the dishwasher off.
Close the faucet.
Contact Miele Service.