Miele G 5051 Operating Instructions Manual Download Page 19

Page: 19 / 84

Initial commissioning

Every dishwasher is tested at the
factory. There will be residual water in
the machine from this test. It is not an
indication that the dishwasher has
been used previously.

Opening the door



Pull the handle to open the door.

If the door is opened during operation,
all functions are automatically
interrupted.



Risk of scalding due to hot

water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.

Closing the door



Push the baskets in.



Push the door until it clicks shut.



Risk of crushing due to the door

closing.
When closing the door, you are at
risk of shutting your fingers in it.
Do not put your hand inside the door
as it is closing.

Summary of Contents for G 5051





















































































Search results

Summary of Contents for G 5051

Reviews:

Related manuals for G 5051

Brands by name

Popular brands

Miele G 5051, Operating Instructions Manual

Search results

Summary of Contents for G 5051

Reviews:

Related manuals for G 5051

Brands by name

Popular brands