Miele G 5051 Operating Instructions Manual Download Page 39

Page: 39 / 84

Operation

Turning on the dishwasher



Turn on the water supply faucet if it is
turned off.



Open the door.



Make sure the spray arms can rotate
freely.



Press the



button.

The indicator light next to the program
selected will come on.

Selecting a program

Choose your program according to the
type of load and the degree of soiling.

The different programs and their uses
are described under

“Program

overview”



Use the

Program

button to select the

program you want.

The indicator light next to the program
selected will come on.
The program cycle time will appear in
hours and minutes in the display.

You can now select program options
(see “Program options”).

If any program options are selected, the
appropriate indicator lights will also
light up.

Summary of Contents for G 5051





















































































Search results

Summary of Contents for G 5051

Reviews:

Related manuals for G 5051

Brands by name

Popular brands

Miele G 5051, Operating Instructions Manual

Search results

Summary of Contents for G 5051

Reviews:

Related manuals for G 5051

Brands by name

Popular brands