Miele G 5051 Operating Instructions Manual Download Page 52

Page: 52 / 84

Program options

Extra Dry

You can select this program option in
order to increase the program drying
performance.

If you activate this program option, the
program cycle times and final rinse
temperatures will increase. The energy
consumption may increase.



Open the door.



Turn the dishwasher off with the



button, if it is turned on.



Press the



button in and,

while

holding it in

, turn the dishwasher on

using the



button.

Keep the



button pressed in for at

least 4 seconds until the



indicator

light comes on.

If this does not happen, start the
procedure from the beginning again.



Press the

Program

button 11 times.

The top left program indicator light will
emit 1 long flash and 1 short flash at
intervals.

The flashing sequence in the time
display indicates whether the Extra dry
program option is activated or not:

 

: Extra Dry is activated

 

: Extra Dry is deactivated



Press the



button to change the

setting.

The setting is now saved.



Turn the dishwasher off with the



button.

Summary of Contents for G 5051





















































































Search results

Summary of Contents for G 5051

Reviews:

Related manuals for G 5051

Brands by name

Popular brands

Miele G 5051, Operating Instructions Manual

Search results

Summary of Contents for G 5051

Reviews:

Related manuals for G 5051

Brands by name

Popular brands