Program options
49
Buzzers
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault.
The buzzers at the end of a program
and the alarm tone in the event of a
fault will sound four times at intervals
with a short pause between each set.
The buzzers are switched off as
standard.
You can switch on the buzzers that
sound at the end of a program if you
wish. The alarm tone that sounds in the
event of a fault is always switched on.
Open the door.
Turn the dishwasher off with the
button, if it is turned on.
Press the
button in and,
while
holding it in
, turn the dishwasher on
using the
button.
Keep the
button pressed in for at
least 4 seconds until the
indicator
light comes on.
If this does not happen, start the
procedure from the beginning again.
Press the
Program
button 4 times.
The top left program indicator light will
flash rapidly 4 times at intervals.
The flashing sequence in the time
display indicates whether the buzzers at
the end of the program are activated or
deactivated:
-
: buzzers are activated
-
: buzzers are deactivated
Press the
button to change the
setting.
The setting is now saved.
Turn the dishwasher off with the
button.
