Miele G 4993 Page 45 Operating Instructions Manual Download

Page: 45 / 76

Options

Factory default settings

If you have altered any settings from the
factory default, you can reset them
back to the factory default settings as
follows:



Open the door.



Turn the dishwasher off with the



button, if it is turned on.



Press the program selection button



, and,

simultaneously

switch the

dishwasher on using the



button.

Keep the program selection button



pressed in for at least four seconds
until the lower right program indicator
light comes on.

If this does not happen, start the proce-
dure from the beginning again.



Press the



button 19 times.

The



indicator light will flash once at

a long interval and then 9 times at short
intervals.

The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.

–

 

: All settings are set to factory de-

fault settings

–

 

: At least one setting has been

changed



To reset the dishwasher to the factory
default settings, press the program
selection button



The setting is now stored in memory.



Turn the dishwasher off with the



button.

Summary of Contents for G 4993













































































Search results

Summary of Contents for G 4993

Reviews:

Related manuals for G 4993

Brands by name

Popular brands

Miele G 4993, Operating Instructions Manual

Search results

Summary of Contents for G 4993

Reviews:

Related manuals for G 4993

Brands by name

Popular brands