Miele G 4993 Page 40 Operating Instructions Manual Download

Page: 40 / 76

Options

Turning off the refill indicator

If you consistently use a Tab detergent,
you can deactivate the refill indicator if
you wish.



Open the door.



Turn the dishwasher off with the



button, if it is turned on.



Press the program selection button



, and,

simultaneously

switch the

dishwasher on using the



button.

Keep the program selection button



pressed in for at least four seconds
until the lower right program indicator
light comes on.

If this does not happen, start the proce-
dure from the beginning again.



Press the



button 9 times.

The



indicator light will flash 9 times

at short intervals.

The flashing sequence in the time dis-
play will indicate whether the refill indi-
cator is switched on or off.

–

 

: Refill indicator is turned on.

–

 

: Refill indicator is turned off.



Press the program selection button



to change the setting.

The setting is now stored in memory.



Turn the dishwasher off with the



button.

If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
turn the indicators back on.

Summary of Contents for G 4993













































































Search results

Summary of Contents for G 4993

Reviews:

Related manuals for G 4993

Brands by name

Popular brands

Miele G 4993, Operating Instructions Manual

Search results

Summary of Contents for G 4993

Reviews:

Related manuals for G 4993

Brands by name

Popular brands