![background image](http://html.mh-extra.com/html/miele/g-1202/g-1202_operating-instructions-manual_234608046.webp)
Problem
Possible cause
Remedy
The Wash/Rinse,
Drying and End
indicator lights flash
simultaneously.
Fault code FXX shows
in the display.
There may be a
technical fault.
– Clean the water inlet filter
and clean the drain pump
and non-return flap as
described in "Maintenance".
If this does not resolve the
problem:
– switch the dishwasher off
with the On/Off button
K
.
After a few seconds:
– Switch the dishwasher back
on.
– Select the programme
required with the
programme selector button.
– Press the Start/Stop button.
If the programme sequence
indicator lights flash again,
there is a technical fault.
– Call the Service
Department.
The drain pump works
even when the door is
open.
Fault F70:
The Waterproof System
has reacted.
– Close the stopcock.
– Call the Service
Department.
Problem solving guide
46
Summary of Contents for G 1202
Page 65: ...65 ...
Page 66: ...66 ...
Page 67: ...67 ...
Page 68: ...Alteration rights reserved G1202 0509 M Nr 07 502 130 00 ...