![background image](http://html.mh-extra.com/html/miele/g-1-series/g-1-series_operating-instructions-manual_234583041.webp)
Factory default setting
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^
Switch the dishwasher off with the
On/Off button
K
.
^
Press the Start/Stop button in and
whilst holding it in
switch the
dishwasher on using the On/Off
button
K
.
Keep the Start/Stop button pressed in
for at least four seconds until the
"Start/Stop" indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
^
Press the Delay start button twelve
times.
The Delay start indicator light will give
one long flash and two brief flashes at
intervals and "
p 0
" or "
p 1
" will flash in
the Time display.
The flashing sequence in the Time
display shows whether a setting other
than the factory default setting has
been set.
– "
p 1
": All settings are set to factory
default settings.
– "
p 0
": At least one setting has been
changed.
^
To reset the dishwasher to the factory
default settings, press the Start/Stop
button.
^
Switch the dishwasher off with the
On/Off button
K
.
Additional functions
41
Summary of Contents for G 1 Series
Page 73: ...73 ...
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...Alteration rights reserved G1534 G2534 1409 M Nr 07 600 650 00 ...