![background image](http://html.mh-extra.com/html/miele/g-1-series/g-1-series_operating-instructions-manual_234583037.webp)
Switching off
At the end of a programme:
^
Switch the dishwasher off with the
On/Off button
K
.
The dishwasher will continue to use
electricity until it is switched off with
the On/Off button
K
.
If the dishwasher is not going to be
used for a longer period of time, e. g.
whilst on holiday, the tap should be
turned off.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
^
First unload the lower basket, then
the upper basket and cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
Interrupting a programme
A programme is interrupted as soon as
the door is opened.
When the door is closed again, the
programme will continue from the point
it was at before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then close the
door firmly, making sure that it clicks
into place.
Changing a programme
If the detergent dispenser flap has
already opened, do not change the
programme.
If a programme has already started and
you wish to change it, proceed as
follows:
^
Press the Start/Stop button for at
least one second.
The programme will be cancelled.
^
Select the programme you want, and
then start it.
Operation
37
Summary of Contents for G 1 Series
Page 73: ...73 ...
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...Alteration rights reserved G1534 G2534 1409 M Nr 07 600 650 00 ...