Before using for the first time
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Important: To ensure the correct
functioning of the appliance, and
especially if it has been transported
horizontally, let it stand for 8 hours
after transporting it to its final
location before connecting it to the
mains.
Switching on
^
Open the appliance door.
^
Press the rocker switch on the
right-hand side underneath the
control panel.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
The access sensor in the control panel
will also light up.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18° C.
Please note: switching off with the
rocker switch does not disconnect
the appliance from the mains.
Operation
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Please note:
– A sensor that is
available for
selection
is always highlighted in
white
.
– A sensor that is
selected
is always
highlighted in
yellow
.
^
Touch the access sensor so that it is
highlighted in yellow.
Other sensors that are available for
selection will appear in the control
panel.
Switching on and off
15
Summary of Contents for F 1471 Vi
Page 60: ...Niche width A F 1471 Vi 457 mm 460 mm Building in dimensions 60 ...
Page 81: ...81 ...
Page 82: ...82 ...
Page 83: ...83 ...
