Frequently asked questions
158
The following faults can be corrected without contacting the Miele Service Depart-
ment.
If in doubt, please contact Miele.
Risk of injury! Improperly performed installation, maintenance or repair work
can pose a serious danger to users of the appliance.
Installation, maintenance and repairs may only be carried out by Miele autho-
rized technicians.
Do not attempt to open the housing.
Problem
Possible cause and solution
You cannot turn the ap-
pliance on.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
correct fuse rating).
There may be a technical fault.
Disconnect the appliance from the power supply
for approx. 1 minute:
– tripping the relevant circuit breaker or screwing
the fuse out completely, or
– tripping the ground fault circuit interrupter
(GFCI).
If the steam oven still will not turn on, contact a
qualified electrician or Miele Service.
The oven does not heat
up.
Demo mode is activated.
The steam oven can be operated, but the oven heat-
ing does not work.
Deactivate Demo mode (see "Settings – Show-
room Program").
The oven interior has been heated by a heating
drawer operating beneath it.
Open the door and let the oven cool down.
The fan can still be
heard after the appli-
ance has been turned
off.
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will turn itself off automatically after a while.