Problem solving guide
76
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem
Cause and remedy
You cannot switch the
appliance on.
The fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating).
There may be a technical fault.
Disconnect the appliance from the mains connec-
tion for approximately 1 minute by:
– Tripping the relevant mains fuse or unscrewing
the fuse completely, or
– Switching off the residual current protection
device
If, after resetting the trip switch in the mains fuse
box or the residual current protection device, the
steam oven will still not turn on, contact a qualified
electrician or Miele Service.
The oven compartment
does not heat up.
Demo mode is active.
appears.
The steam oven can be operated, however, the heat-
ing elements will not work.
Deactivate demo mode (see “Settings”).
The oven compartment has been warmed up by a
warming drawer in operation underneath it.
Open the door and let the oven compartment cool
down.
The fan can still be
heard after the appli-
ance has been switched
off.
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will switch itself off automatically after a while.
Summary of Contents for DG2740
Page 84: ...Installation I N S T A L L A T I O N 84 Side view A Glass front 22 mm Metal front 23 3 mm ...
Page 89: ......
Page 90: ......