8.
Position the “U” shape you just created to the Bottom, Sides
and Top assembled in Step 6. Align the loops of the end of
the “front” (opposite of the “pan stop”) with the front end of
the “back.”
9.
Unfold the Top Panel and swing it over into position over the
back end. Then connect the hooks of the Top Panel to the
top rungs of the two upright Side Panels.
10.
Locate 2 Corner Rods (F) and insert them through the
various intersecting loops where the two side panels meet.
11.
Locate the open end of the pet home that has the pan stop
attached to the end of the bottom panel. Position and
hang the Door Panel (D) using the two hangers attached to
the top rung. It will swing down naturally into position. The
uppermost loop on the door panel should rest on top of the
uppermost loops on the side panels. The door should be
positioned so that the slide-bolt latches are on the right
side, enabling the door to open outward from right-to-left.
12
. Take two of the Corner Rods (F) and insert them downward
through the various intersecting loops of the two front
corners.
13.
Position and hang the back panel (E) against the open end
of the pet home using the two hangers attached to the top
rung. It will swing down naturally into position. The
uppermost loops on the back panel should rest on top of the
uppermost loops on the side panels.
3