Midway CART Fury Championship Racing, Operation Manual

Page: 60 / 104

16 M
IDWAY
A
MUSEMENT
G
AMES
, LLC
C
HAPTER
3 S
ERVICE
To service the Seat Assembly…
The Seat Assembly includes the pedestal base. Refer to the Seat Pedestal Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Disconnect the Seat Assembly from the cabinet by removing 8 tamper resistant screws used to fasten
the assembly to the slide rails in the cabinet.
• Slide the Seat Assembly halfway back along the rails to expose wiring.
• Disconnect the speaker cable and slide the seat the rest of the way off the rails.
• Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting
plate assembly off the pedestal.
• Place the seat on its back, on a flat surface. Perform the desired repair or equipment replacement.
• Reinstall using the hardware provided.
IMPORTANT: Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and
torque each bolt to seven to nine ft.-lbs. (0.7 to 1.0 Nm) if it was loosened (see illustration).