Midway CART Fury Championship Racing, Operation Manual

Page: 6 / 104

VI
M
IDWAY
A
MUSEMENT
G
AMES
, LLC
4. Refer to the manufacturer’s instructions in order to set the hub switches for LNK (link) and X (cross-
over) activity.
5. Fasten the hub to the bottom of the most central cabinet using a hook-and-loop type material. Orient
the hub so that the indicator lights are visible and cable jacks are accessible.
6. Make sure excess cable is tied into a coil and that all cables are routed through the notch in the rear
door. Connect the AC adapter for the hub and all line cords to AC power.
7. Switch on power and closely observe the screen for each cabinet during start up. Each automatically
enters ATTRACT MODE if no errors are found. Refer to Troubleshooting in the operation manual if
errors are detected.
8. Unlock the coin door for each cabinet to access the operator control buttons inside coin vault. Press
and hold the TEST button to enter the menu system.
•Verify linked games have compatible software versions. Newer versions may contain instructions pre-
vious versions do not, causing games to halt or reset at random.
9. Select
ADJUSTMENTS from the Main Menu screen, then scroll to the ADDITIONAL ADJUSTMENTS MENU and
press the Test button
. Select GAME LINK NUMBER and press Test. Assign a linking number ranging
from 1 to 4 to each game cabinet.
NOTE: Each cabinet must have its own individual and unique number. The first cabinet on the left is
always cabinet 1, the second is cabinet 2, etc.
10. Repeat these steps for each remaining game cabinet you wish to link.
11. Close and lock the coin door, and reinstall and lock the rear door for each cabinet. Lower the leg level-
ers for each cabinet until the casters do not touch the floor and the cabinets are level. Lock the levelers
in position by tightening the nuts provided.
CAUTION
Do not connect or disconnect any cable to the game electronics or hub with the power turned
on. Circuit disruptions may damage the game and void the warranty.