EN
www.midlandeurope.com
7
Mesh Private group
This is a special setting that allows the possibility to talk only with specific
BTMESH unit that share the same “encryption code”. This setting requires a
pairing procedure
Start a Midland BTMESH “Public Group” communication
The two units supplied in the same Midland BTMESH box, are already ready
to use with Mesh communication on the Middle button, this means you don’t
need to perform any procedure.
If the devices are not part of the same kit, or the units have been purchased
separately, you need only to set the correct ID number in order to use them.
Midland BTMESH setup
There is no need to perform a pairing procedure to start a Mesh communica-
tion, you only need to be sure that each unit has a different ID number.
Follow this simple procedure:
1. Turn on the unit.
2. Be sure to be in Mesh mode
3. Press shortly together VOL+ and VOL- buttons
4. You will hear a voice telling you “Mesh” and your ID number.
5. Now you have 5 sec to press Vol+ or Vol - to change the number from 1 to
10 (the LED light will flash Green color).
6. Change each ID number and be sure that all users in the group have diffe-
rent ID number
Now you
can start the Mesh communication
How to open the Mesh communication
To use the Mesh feature, be sure that all units have a different ID number, then
you need to press short the MIDDLE button .
You will hear the voice “Mesh on” and the LED light will flash GREEN and
BLU. When the Mesh feature is active you can talk with all other units in
range that have the Mesh active as well.
How to close the Mesh communication
Just press again the MIDDLE button and the mesh communication will be
closed (a double beep sound will confirm) a voice will tell “Mesh disable”.
Attention: In order to communicate in Mesh mode, each user needs to open the
Mesh on his own unit. If the Mesh communication is closed, it is not possible for
the other users of the group to talk to you until you reopen it again.
BT Mesh audio quality
The “Mesh clear audio mode” feature allows you to improve the audio quality
during the Mesh communication.Thanks to this feature you will have a very
clean communication (no glitch) but the maximum distance between the first
and last rider will be reduced. By default this feature is not active, to give the
maximum distance possible.
Enable/Disable “Mesh clear audio mode”
Press FORWARD and BACKWARD together in Mesh mode, the voice will
tell you “
Mesh clear audio on”.
Press FORWARD and BACKWARD together
again, the voice will tell you “
Mesh clear audio disable”.
Attention: All the units in a Mesh group must have the same
“
Mesh clear audio”
setting, in order to talk to eachother.
BTMESH Guest
In addition to the 10 people talking in a Mesh open group, it is possible to add
an unlimited number of BTMESH users only in listening mode (Guest user).
You can follow the same procedure explained in the “BTMESH Setup” and
instead of choosing one of the ten available numbers, you must choose “Mesh
guest”. The voice “Mesh guest” is available before the number 1 or after the
number 10.
Start a Midland BTMESH “Private Group” communication
If you want to be sure that nobody else will enter the Mesh group communica-
tion, you need to follow a specific pairing procedure to exchange an encrypting
key to all units in the group.
As first step you need to define one unit as “Master”. This is the unit that will
generate the “key” and distribute it to all other user of the group.
It is not important which is the master unit , it can be any unit in the group.
After the pairing procedure, all units will share the same “key”, that means
in case you need to add another unit to the Private group, you don’t need to