EN
www.midlandeurope.com
15
Priority: the music listening mode has the lowest priority. Therefore, it will always
be disabled when another audio communication comes in.
To change the priority behaviour you can use the ”BT UPDATER” Pc Software
or the smartphone “BT SET-APP” application
Attention: It is possible to have all the controls (Play/Pause, FWD, BWD) of the
A2DP music only in “Phone mode”.
If you are listening to A2DP music and you move from “Phone” mode to “FM Ra-
dio” or “Intercom” mode, you can still listening to A2DP music but you don’t have
all the controls buttons available. Only Play/Pause is available with double click on
the “Middle” button.
Music Share
Music Share feature allows to share the same music from
Driver to Passenger.
For example the driver can play the music from his phone and share the same
music to the passenger.
Share the music when both units are connected in Mesh
If the Driver and Passenger are both BTMESH units and are connected only
with Mesh, it is possible to share the music following the same procedure used
to pair two units in Intercom mode.:
1. Turn off both the unit
2. On both BTMESH press and hold down the middle button about 7 sec.,
until the Red light is on permanently.
3. Now press Backward long (3 sec.) , the Blue and Red lights will flash fast,.
Now release the button.
4. On the other BTMESH unit repeat the same procedure using Backward
very long, the Blue and Red lights will flash fast. Now release the button.
5. The two units will search for each other
6. When successfully paired, each unit will have the Blue light on for one se-
cond and then go back to the setup mode (Red light always on).
7. On both units, double click on the Middle button, the Red light will turn
off and the Blue light will start flashing. You can use now your Midland unit.
Share the music when both units are already connected via Bluetooth intercom
If the Driver and Passenger are already connected with Bluetooth Intercom
(the passenger is paired on the BWD button of the BTMesh), it is possible to
share to the Passenger the music of the Driver, no additional pairing procedure
is needed.
Start Music Share
- To start sharing your A2DP music with the passenger (maximum distance
10m), you must press the “Backward” button long (3 sec.) while the music is
playing. You will hear the voice “MusicShare” and the music will start on the
Passenger unit.
- The passenger can only stop the music share pressing short the middle but-
ton (but cannot control the music). The driver can start again the music sha-
ring just pressing the “Backward” button for 3 seconds.
With music share active you can not keep open the Intercom communication,
(The Music share will be paused when you open the intercom and will be resu-
med as soon as the Intercom will be closed).
Attention: be sure that the phone is paired on the Vol+ button and to use the play
command from the Intercom device (Middle button).
Hint: while in Music Share mode, the driver can keep the Mesh open to talk with
the Passenger and at the same time listen to the music.
GPS Navigator
The GPS Navigator can be paired using the “Vol +” or the “Vol -” button.
›
button
(support for stereo A2DP audio and HFP mono).
All devices paired to “Vol +” button are always active in background during
the Mesh communication, but will interrupt all other communications (like
Bluetooth Intercom, and FM Radio).
›
Volume - button
(support for HFP mono audio). All devices paired on “Vol
-” button are always active in background during the Mesh communica-
tion. You can decide if the audio from the “Vol -” connection is shared with
the other people of the Mesh group (“Bridge” feature on) or if it is private