
EN
10
www.midlandeurope.com
only to the unit that was paired with the BACKWARD button and only if the Mesh
is not open.
If needed, you can disable the VOX feature simply by pressing the
BACKWARD button for 7 sec. A voice announcement will advise you when
the VOX is disabled. To turn the VOX on again, just press the same button and
a voice announcement will advise you that the VOX is now active. This setting
is remembered also if you turn off the unit.
Hint: this feature is very useful when you have a Passenger that has a Midland
Bluetooth intercom unit (not a BTMESH) and you like to talk to this person
without the need to press a button to open the communication.
Unit already busy in a conversation
If you try to open a Bluetooth intercom connection to another person that is
already talking with someone else (or is in a middle of a phone conversation),
you will hear a “busy” double beep tone. Just wait sometime and try again,
maybe this time the “line” is not busy.
The person who is called, will be advised that someone is trying to call and will
hear a voice announcement with the number of the button from which the
request is coming.
In this way as soon as the first conversation is over, the person can easily con-
tact the caller by opening the intercom of the specific button number (indica-
ted by the voice announcement).
Mesh group and Bluetooth Intercom together
When you have a Mesh unit connected to the Passenger Midland BT unit via
Bluetooth, normally the Mesh communication can not be opened together
with the Bluetooth Intercom communication.
Thanks to the “Bridge” function, it is possible to make the Bluetooth Intercom
user part of the Mesh group and allow all of them to talk together.
The BTMESH units that have the Midland BT connected, act as a “bridge”
between Bluetooth and Mesh communication.
Bluetooth to
Mesh bridge
PASSENGER
Midland intercom
(not BTMESH)
BTMESH
Bridge mode on
Press VOL+ button long , you will hear the voice “Bridge on”. Now all the units
in the Mesh group and Bluetooth Intercom can talk together.
Bridge mode disable
Press again the VOL+ button and you will hear the voice “Bridge disable”. Now
Mesh and Intercom are separate, and only the unit in the middle can hear both
audio. By default this feature is “Bridge disable”.
A- Manual activation
Mode
Forward button
Middle button
Rear button
Mesh
Short press:
Open/Close Bluetooth intercom
to paired rider
Short press:
Open/Close Mesh communica-
tion to the group
Long press:
Change mode
Double click:
Play music
Short press:
Open/Close Bluetooth intercom
to paired rider