manualshive.com logo in svg

Midland BTMESH, Instruction Manual, Page: 14 / 26

Share
Download
Midland BTMESH Instruction Manual Download Page 14

EN

12

 www.midlandeurope.com

 

›

Pairing to the “” button:

 for Phone with music A2DP stereo, 

GPS Navigator with A2DP audio or Bluetooth TFT system integrated in 

the motorbike. 

 

›

Pairing to the “Volume -” button:

 for Phone or GPS Navigator only with 

mono HFP audio. 

When a device is paired to the “Vol +” or “Vol –” buttons the “Phone” mode 

is activated.

Bridge and Background feature

BT Mesh has two specific features to manage the Bluetooth audio and the 

Mesh audio when are both open together:

 

›

BRIDGE (for Mesh +Intercom)

 

This feature , when on, allows to “mix” the Bluetooth audio from the In-

tercom connection or from the VOL - and VOL+ together with the audio 

from the Mesh group. For example, when enabled, you can have the Pas-

senger (that is connected to the Driver via Bluetooth), part of the same 

Mesh group of the Driver. The  driver is a “bridge” between the Mesh group 

and the Bluetooth intercon connection to the passenger.

 

›

BACKGROUND (only for Bluetooth intercom)

 

This feature allow to have the audio from the Bluetooth device paired on 

Vol-,, in background to the Bluetooth intercom.

Connection on VOL+

 

›

Mesh group: 

All devices paired to “” button are always active in 

background during the Mesh communication. It is possible to share only 

the MONO audio from the “” to all the Mesh group, depending 

on the setting of “Bridge” feature. A2DP (stereo) audio from can 

not be shared with Mesh group.

 

›

Bluetooth Intercom: 

All devices paired to “” button has higher 

priority over the Bluetooth Intercom communication and will interrupt all 

the other communication (like Intercom, FM Radio and Music).

Midland intercom 

(not BTMESH)

Midland intercom 

(not BTMESH)

Long press VOL-

 toggle background on/off to bluetooth intercom.

Background on

 = audio from 

VOL-

 stay in background to the BT in-

tercom.

Background off 

= audio from 

VOL-

 have higher priority and close the 

BT intercom.

Long press VOL-

 toggle the “Bridge” feature to Mesh

Bridge on 

= audio from 

VOL- 

or from Bluetooth intercom is repeated 

to all Mesh group

Bridge disabled

 = audio from

 VOL- 

or from Bluetooth intercom is not 

sent to Mesh group

Summary of Contents for BTMESH



























Reviews:

No comments