EN
www.midlandeurope.com
9
4. Now the “Encryption” key is deleted and only the Public mode is availabe
5. Make a double click on the Middle button to exit and go to working mode
(blue LED flashing).
Bluetooth Intercom compatibility
The BTMESH is compatible with Bluetooth Midland Intercom devices.
One Midland BTMESH unit can be paired to maximum two other Midland BT
units and one Universal Intercom (that means in total 3 units via Bluetooth).
Midland intercom
(not BTMESH)
Midland intercom
(not BTMESH)
For example you can have all the Mesh group active on the MIDDLE button
and at the same time you can have your passenger paired via Bluetooth to the
BACKWARD button and talk to all of them together.
Pair the Midland BTMESH to another Midland BT via Bluetooth
To pair the Midland BTMESH to another Midland BT unit, you must first enter
the setup mode:
1. Turn off the unit
2. On the BTMESH press and hold down the middle button about 7 sec., until
the Red light is on permanently.
3. Now press one of the two buttons (Forward or Backward) for 3 seconds
depending on which button you would like use to open the intercom to the
other unit. The Blue and Red lights will flash.
4. On the other Midland BT unit repeat the same procedure using any button
available depending on the model (Forward, Middle or Backward)
5. When successfully paired, each unit will have the Blue light on for one se-
cond and then go back to the setup mode (Red light always on).
6. Now the unit is ready for another pairing procedure, and you can pair
another Midland BT unit following the same procedure, but using a diffe-
rent button.
If you don’t have more devices to pair, you must exit the setup mode before
you can use the units:
› Double click on the Middle button, the Red light will turn off and the Blue
light will start flashing. You can use now your Midland unit
How to use the Bluetooth Intercom
To use the intercom feature, be sure that all units are turned on and correctly
paired together.
Manual activation in Bluetooth Intercom communication
When in “Mesh Mode” press the button corresponding to the unit you would
like to communicate with (Forward and Backward buttons).
.After some seconds the intercom communication will open. The communi-
cation remains active until you press again the same button. To quickly open
the intercom to another person, just press the button corresponding to the
other unit, the previous intercom will be automatically closed and the new
connection will be open (see Table A).
Voice activation (VOX)
The VOX feature allows you to open the Intercom communication simply by
saying something. You can use a simple word like “Intercom” or “Hello Mi-
dland” and when the voice will be detected, you will hear the announcement
“VOX”.
After some seconds the communication will be opened and will remain active
for the time you are talking. If there is no conversation the intercom will be
closed after 40 seconds. If needed you can close the intercom manually wi-
thout waiting 40 seconds (just press the Backward button).
Attention:
The Voice activation (VOX) can open the intercom communication