Miditemp MP 11, Owner'S Manual

Page: 27 / 76

27
>
>
>
>
>
Changing the Bar without Markers
If you have selected a MIDI file, and the MARKER/BAR button remains deac-
tivated (is not illuminated) when you start the song, it means the song does
not contain any MARKERS. However, you still have the option of skipping to a
certain BAR within the song.
To do that, press first the MARKER/BAR button. This opens the BARS window.
You can now use the DIAL or the UP/DOWN buttons to set the bar of your
choice, to which you want to skip while the song is being played back. When
you want to have the skip carried out, simply press the GO TO button. You
can also have a change of bar from the song currently playing to the next
song that you have already prepared. To do this, also press first the MARKER/
BAR button, which displays the BARS window of the song being played
(Current Song).
Continue by pressing the button NEXT/CURRENT SONG. Doing so, activates
this button (illuminates in blue) and puts the „Next Song“ BARS window on
display. You can now use the DIAL or the UP/DOWN buttons to set the bar of
your choice, to which you want to skip.
Pressing the GO TO button will then allow you to change from the bar that is
being played (of the current song) to the bar that you have set (of the next
song).
Note: In the described change of bars (without markers), there is no WIZARD
function available.
LOOP - Playing Marker Parts in an Endless Loop
The MARKER/BAR button illuminating after you start a song indicates that
the song contains MARKERS. In that case, the Loop function is available to
you (= infinite loop of a marker-part) if necessary.
If you want to use the Loop function, press the MARKER/BAR button after the
song has started, in order to open the Markers window. The MARKER that is
being played back, is displayed in RED. If you want to have the marker-part,
which is displayed in red, played back in an infinite loop, press the button
ENTER/LOOP.
This leads to the corresponding marker-part being played back in an infinite
loop, until at some point you press the ENTER/LOOP button again, in this
manner undoing the Loop function
GotTo: Changing the Bar without Markers