Miditemp MP 11, Owner'S Manual

Page: 13 / 76

13
Pressing the IMMEDIATE button once will activate it (illuminates in blue), and
will deactivate the CROSSFADE button. If you press the GO TO button during
the playback of a song, there will be a fast skip to the next MARKER or to the
next song
Pressing the CROSSFADE button one time briefly will activate it , and will
deactivate the IMMEDIATE button. If during the playback of a song you press
the GO TO button, MP11 will slowly fade to the next MARKER or to the next
song, respectively.
Holding down the CROSSFADE button for about 2 seconds takes you directly
to the menu display, FADE CURVE. There you can change the current crossfa-
de setting.
Note: IMMEDIATE and CROSSFADE cannot be active both at the same time.
The GO TO button is linked with the buttons, IMMEDIATE and CROSSFADE.
Pressing the GO TO button during the playback of a song while the IMMEDI-
ATE button is activated (illuminates in blue) results in a fast skip to the next
MARKER or to the next song. If the CROSSFADE button is already activated,
pressing the GO TO button gets MP11 to slowly fade to the next MARKER or
to the next song.
Note: If the WIZARD is already activated (illuminates in blue) and you have put
MARKERS in your songs, the change - when you press the GO TO button - will
take place after the marker part that is currently playing is over. If the WIZARD
button is deactivated, the change will take place at the end of the bar that is
currently being played
Using this button you can add songs to a playlist, or prepare the next song
during the normal playback mode. Therefore, in the normal playback mode
for example, while a song is playing, press first the TITLE button (= displays
the song list). Now select the song that you want (= the title gets shaded in
color) using the DIAL, and then press the NEXT SONG button. Now you can
see the song you have selected as NEXT SONG below on the display.
Note: If you are preparing the next song in the normal playback mode, the NEXT
SONG button might blink 3x in a row .The blinking of the button indicates that
the preparation of the next song could not be completed. In such cases, just give
it a few seconds and repeat the action. After that, the next song will be loaded as
usual and will appear below on the display.
Pressing the SMOOTH button once during the playback of a song activates
the so-called announcement mode (the button illuminates in blue) - this
reduces the volume of the song that is currently playing, and deactivates
the microphone effects. You can undo the SMOOTH function by pressing the
SMOOTH button one more time
Knob for the setting of the microphone effect, DELAY (echo).
Knob for the setting of the microphone effect, REVERB (reverberation).
IMMEDIATE
CROSSFADE
> see page 46
GOTO
NEXT SONG
SMOOTH
MIC delay
MIC reverb
2s
In detail: Upper Control Panel