![background image](http://html1.mh-extra.com/html/midea/mvc-rtb2-r/mvc-rtb2-r_user-manual_1791689036.webp)
C) Cancel scheduled setting
a.
Turn the power off, then turn the power on again after 30 seconds to reset the scheduled setting;
b.
Set the scheduling time to “00:00”.
Important:
a.
The scheduled time showed on the display panel is based on the system time. For example, if the
scheduled time is 9: 00, the robotic vacuum cleaner will start cleaning automatically at system
time 9:00 every day. Therefore, you have to set the time of robotic vacuum cleaner to be the
same with real time to avoid confusion.
b.
Once the setting is done, the cleaner will start cleaning automatically at scheduled time. If the
power switch is turned off, you have to reset the schedule.
2 Scheduling by remote control
A)
Scheduling setting
a.
Press TIMING button on the remote control to enter time setting, and then press again to enter
scheduling. (If UV button is light on, you are at scheduling setting, otherwise you are at system
time setting)
b.
Press On/Off button or move the connecting rod, the flashing digit means hour-setting. Move the
connecting up or down to increase or decrease. Move the connecting left and right to move the
cursor.
c.
When the cursor is on the flashing minute digit, pres On/Off button to confirm setting.
d.
In scheduling setting, press TIMING button to quit the setting. (The time will not be saved on the
cleaner if On/Off button is not press.)
B)
Cancel scheduled setting
a.
In cleaning or standby mode;
b.
Long press the TIMING button on the remote control for 3 seconds until a beep sound from the
robotic vacuum cleaner. The time is “00:00”, and the scheduled setting is canceled;
Important:
1.
The numbers showed on the display panel is the current system time or scheduling setting. If you
are adjusting the system time, UV indicator on the display panel is not shown. On the other hand,
UV indicator is shown while setting a schedule.
2.
To set the time, press On/Off button on the remote control, then set the hour and minute. Press
TIMING button on the remote control to enter or quit time setting.
3.
The On/Off button on the remote control is same as the
/
button on the panel.
ON PAUSE
14
Summary of Contents for MVC-RTB2-R
